.243 brass scarred and won't extract after firing??

[Robinhood]

I think I mentioned earlier that what you said was probably the best way to go about it and yes I have use very fine round files and compounds to knock of burrs and remove tooling Mark's etc with great results. If it's just a small burr and you carefully work only the burr you can likely remove that burr without damaging anything else. I technically would be considered a master machinist although I judge myself by what my fathers capabilities were and by those standards I do not consider myself a master. But put it this way, I have confidence in my skillsets that I would not be afraid to try your way or my way.. I would definitely agree the way you mentioned would probably be simplest but at this point it's all kind of a guessing game without seeing the actual problem.

Sent from my SM-N975U using Tapatalk


My point was that the barrel is still in the action.

I was not challenging what YOU could do.

Machinist can have multiple skill sets differing from industry...I have lost most of mine via atrophy.

[Ted_Feasel]

My point was that the barrel is still in the action.

I was not challenging what YOU could do.

Machinist can have multiple skill sets differing from industry...I have lost most of mine via atrophy.I got you.. I was just throwing things out there he can try if he feels comfortable doing them.. I still agree you suggestion is the simplest and easiest given what we knew at the time.. suck though he found it's a actual depression in the chamber instead of a burr or something that could easily be fixed :(

Sent from my SM-N975U using Tapatalk

[sharpshooter]

First thing I'd do is bore scope it....

[Ted_Feasel]

First thing I'd do is bore scope it....I think he discovered that there was a depression in the chamber and basically on firing, the brass was forming into that depresssion.. unless I'm thinking of a different thread lol.. theres another guy having a similar issues on a 338 but yep for sure bore scopes are a must have for us that work/build our own. I need a better one, my wife got it for me years ago but there are some pretty inexpensive nice ones out these days that connect to your phone or tablet.. I may upgrade mine after recovering from christmas :/

Sent from my SM-N975U using Tapatalk

[dave123k]

Update 1-20-20: Spoke to Savage, they want the rifle. Boxing up and sending in. It is 6 months out of warranty but being never fired (nor rusted, etc.) they want to see it & possibly replace. Yes if it were a burr sticking up, it would be easier to fix. this is a deep machining scar of some kind. Anyway, thanks for all the responses. I'll keep you posted

[Ted_Feasel]

Update 1-20-20: Spoke to Savage, they want the rifle. Boxing up and sending in. It is 6 months out of warranty but being never fired (nor rusted, etc.) they want to see it & possibly replace. Yes if it were a burr sticking up, it would be easier to fix. this is a deep machining scar of some kind. Anyway, thanks for all the responses. I'll keep you postedAwesome to hear, glad they are taking care of it. I've never had anything but good experiences with savage support.. keep us updated:)

Sent from my SM-N975U using Tapatalk

[old110]

Do you have any new info like an update on your issue? I have followed this thread and am curious as to what they will do. I had the same issue with my Axis (brass hard to extract) but mine was a rough chamber and not a depression. I fixed it by chucking a mop in my drill with a little polishing compound on it.