Help with determining age of 110L. 5 digit serial number

[woodsman1977]

Hello all,

I recently purchased a savage 110L chambered in .338 win mag from gunbroker. I bought this gun with the intent on using this magnum action and putting a x-caliper barrel chambered for .300 RUM.

The serial number is 411xx with no letter code, from what I have been able to find on here there this gun is probably pre 1966? What I am looking for in particular is a new trigger for it, I have my new barrel and a boyds stock but an finding the trigger assembly not fitting because of the trigger and sear configuration.

Can someone verify my guess on age? and any suggestions on trigger options? I have looked at Midway, Brownells, and Numrich without much luck.

Thanks in advance for any input.
Jim

[GaCop]

If you could post some pictures, it would help in identifying what you have.

[PhilC]

Does the barrel have a band for the read sight? What is the letter in the barrel stamp (oval with 2 digits and a letter)? If you have a barrel band, you've got more to think about than just triggers as the pre-66 110s used a unique bolt that will not work with post-66 barrels.

[woodsman1977]

Here are some pictures of the trigger ass’y, barrel.

The barrel isn’t a factory barrel which I didn’t know about when I bought it.https://uploads.tapatalk-cdn.com/20191230/bc31732bb68ac52bc367e75c2b740e23.jpghttps://uploads.tapatalk-cdn.com/20191230/d372a7b4a123ef69e7265aa8544a6adb.jpghttps://uploads.tapatalk-cdn.com/20191230/2d914628044e248ba698e80eeb1923e3.jpghttps://uploads.tapatalk-cdn.com/20191230/3cb3579210287c8585d8b52adf393976.jpghttps://uploads.tapatalk-cdn.com/20191230/48d65d97c675f5585374df787ceee491.jpghttps://uploads.tapatalk-cdn.com/20191230/b5c0922abbd76e577b48218205751838.jpg


Sent from my iPhone using Tapatalk

[sharpshooter]

That is pre-1966, but the bolt has been upgraded to the current production type. Not much you're do about a trigger unless you can find the the rest of the parts to utilize a pre-accutrigger set up.

[woodsman1977]

That is pre-1966, but the bolt has been upgraded to the current production type. Not much you're do about a trigger unless you can find the the rest of the parts to utilize a pre-accutrigger set up.

Thanks Sharpshooter, I am now thinking about putting it back together as it was and just putting it into the safe.

This probably isn’t the best action to start with if I am going to work up a new caliper....if parts aren’t readily available? perhaps its back to looking for a newer action??

Thanks everyone!


Sent from my iPhone using Tapatalk

[Bullchaser65]

Thanks Sharpshooter, I am now thinking about putting it back together as it was and just putting it into the safe.

This probably isn’t the best action to start with if I am going to work up a new caliper....if parts aren’t readily available? perhaps its back to looking for a newer action??

Thanks everyone!

Sent from my iPhone using Tapatalk

I have the same trigger and almost the same action. I couldnt figure out what year or what trigger upgrade to get. Thanks for the info!