A little load development - H4895

[JoeJoe]

Made it to the range today with some handloads......while all load hovered around .75", 41.0 grains of H4895 behind a 168gr SMK seemed to shine above the rest.

https://66.media.tumblr.com/6044d68d01e62a9e37cf3afa3ff2dc4a/f16788bc667e2c59-e8/s540x810/283524da0c729a86d89099e15b7e5c1e25b8b8aa.jpg
https://66.media.tumblr.com/46959151c3a0d74746fe05f0433345ea/f16788bc667e2c59-bd/s640x960/3ee03e3dc37273e59001053271a37928a72c77b9.jpg

[hamiltonkiler]

Tell us about that gun. Watcha got? Looks good and clean.[emoji1]


Sent from my iPhone using Tapatalk

[JoeJoe]

10 FCP-SR in .308

Started life with an accu-stock and a 20" fluted barrel. I swapped the stock for a Bell/Carlson M40 shortly after purchase (in 2017 I think) and just swapped the barrel for a 26" Criterion (Varmint profile) about 3 weeks ago. I'm running a Savage flush mount mag (but have Accurate-Mag bottom metal ordered) and a Bushnell Nitro 4x16 FFP Scope. I removed the factory BA-style bolt knob and replaced with an oversized round knob.

Barrel, barrel nut, wrench, go/no-go gauges are from Northland Shooters Supply.

[hamiltonkiler]

Where is the accu stock?
Any interest to sell to a poor man like me?
Good looking rig by the way!


Sent from my iPhone using Tapatalk

[Orezona]

I have one off a 116. If you can use it, it is yours for free. I believe in helping out.

[JoeJoe]

Better take him up on that offer.....I sold mine shortly after I bought the Bell/Carlson.

[Shooter0302]

10 FCP-SR in .308

Started life with an accu-stock and a 20" fluted barrel. I swapped the stock for a Bell/Carlson M40 shortly after purchase (in 2017 I think) and just swapped the barrel for a 26" Criterion (Varmint profile) about 3 weeks ago. I'm running a Savage flush mount mag (but have Accurate-Mag bottom metal ordered) and a Bushnell Nitro 4x16 FFP Scope. I removed the factory BA-style bolt knob and replaced with an oversized round knob.

Barrel, barrel nut, wrench, go/no-go gauges are from Northland Shooters Supply.
Which of the 4 chamberings did you choose ?, What is the 168's OAL ?

[JoeJoe]

Which of the 4 chamberings did you choose ?, What is the 168's OAL ?

Looking through NSS website, standard .308 Win chambering....1-10 twist (hope that answers your question). Overall length is 2.810, since I have new bottom metal and mags on the way, I figured that would be a safe place to start.

[firemedic142]

Ozerona I would be interested im the 116 accustock. Do you have the recoil lug that goes with the accustock?