Dave Hoback
12-14-2019, 09:21 AM
I’m getting addicted to these 80% receivers! I like machining & building more than I like shooting. After building so many of these over the years, starting just after the Billary Clinton AWB expired in 2004, I’ve found the secrets of buying very high quality parts, direct from the machine shop manufacturers. (Instead if searching for the big names). The result is the AR15s I build now, are truly from ME!
Here is the 80% lower being machined.
https://i.ibb.co/wMpkK4D/D10-CCEA7-779-B-4-AC5-A13-D-DDC5-ACE8676-B.jpg (https://ibb.co/72rfGK7)
https://i.ibb.co/JtwYpy1/7-CD5-ABA0-1891-40-D4-95-AA-734780-D1-FB6-D.jpg (https://ibb.co/V9cFCQ1)
And completed Lower.
https://i.ibb.co/hHWXmDn/B398-D637-68-A7-4-D5-F-9-FAE-B0953052-CDAD.jpg (https://ibb.co/VDSHq2h)
https://i.ibb.co/nCmxNhk/385-B4987-103-B-4097-BA6-F-23-D7-F8301461.jpg (https://ibb.co/FV3RLG7)
Upper during assembly. For every one of my builds, I now uses Nitrided part for any that deal with hot chamber gases/pressure...the Barrel, Flashhider, Gas Block & Tube, BCG. ALL Nitride treated.
https://i.ibb.co/KxkvM3p/A1604-F82-2-FD9-4881-8189-72465-C8-A62-BA.jpg (https://ibb.co/N2PB8Hd)
And completed rifle. Haven’t decided on which stock, and I’ll likely swap in a Magpul MOE pistol grip.
https://i.ibb.co/bHm1fTp/A3-BD4889-7-EFE-4404-B065-26-EF0-A00-E849.jpg (https://ibb.co/CJ8Brgx)
https://i.ibb.co/wQfM71m/D9-B99608-207-A-4-CF5-8-E8-C-D78-A40-F5-BF5-D.jpg (https://ibb.co/fNs497w)
https://i.ibb.co/5nnt9KB/124-F3-F14-2115-4-CD0-9-F10-0-EFD68-F6-F276.jpg (https://ibb.co/gPPH74z)
Here is the 80% lower being machined.
https://i.ibb.co/wMpkK4D/D10-CCEA7-779-B-4-AC5-A13-D-DDC5-ACE8676-B.jpg (https://ibb.co/72rfGK7)
https://i.ibb.co/JtwYpy1/7-CD5-ABA0-1891-40-D4-95-AA-734780-D1-FB6-D.jpg (https://ibb.co/V9cFCQ1)
And completed Lower.
https://i.ibb.co/hHWXmDn/B398-D637-68-A7-4-D5-F-9-FAE-B0953052-CDAD.jpg (https://ibb.co/VDSHq2h)
https://i.ibb.co/nCmxNhk/385-B4987-103-B-4097-BA6-F-23-D7-F8301461.jpg (https://ibb.co/FV3RLG7)
Upper during assembly. For every one of my builds, I now uses Nitrided part for any that deal with hot chamber gases/pressure...the Barrel, Flashhider, Gas Block & Tube, BCG. ALL Nitride treated.
https://i.ibb.co/KxkvM3p/A1604-F82-2-FD9-4881-8189-72465-C8-A62-BA.jpg (https://ibb.co/N2PB8Hd)
And completed rifle. Haven’t decided on which stock, and I’ll likely swap in a Magpul MOE pistol grip.
https://i.ibb.co/bHm1fTp/A3-BD4889-7-EFE-4404-B065-26-EF0-A00-E849.jpg (https://ibb.co/CJ8Brgx)
https://i.ibb.co/wQfM71m/D9-B99608-207-A-4-CF5-8-E8-C-D78-A40-F5-BF5-D.jpg (https://ibb.co/fNs497w)
https://i.ibb.co/5nnt9KB/124-F3-F14-2115-4-CD0-9-F10-0-EFD68-F6-F276.jpg (https://ibb.co/gPPH74z)