PDA

View Full Version : Lefty MDT chassis 6.5 creedmore build.


ninner
12-13-2019, 02:08 PM
Turned out pretty good, just fine tuning the sled then I’ll see how she prints.https://uploads.tapatalk-cdn.com/20191213/22f3817f81bf63a41a4fcc6232c93859.jpg


Sent from my iPhone using Tapatalk
ninner
12-18-2019, 06:05 PM
https://uploads.tapatalk-cdn.com/20191218/89c6f634cc8dd902facbf63159df84cc.plisthttps://uploads.tapatalk-cdn.com/20191218/c5b98c656516c7c229abaceb1b925ca1.plist
I got a chance to get her sighted in today. Not too bad off a bipod at 100 yds. The sled worked flawlessly I may not buy a mag for this one. I am considering milling out the flat on the right side of the receiver so I can right hand load. Has anyone done this. It would make it very handy shooting off the bench.


Sent from my iPhone using Tapatalk
Robinhood
12-19-2019, 12:02 AM
Nice.
Barrythecableman
01-05-2020, 10:33 PM
Mine is almost the exact set up but right handed and I run a 2.5x10 scope as it is the only one I like that clears the bolt handle.
ninner
01-06-2020, 11:52 AM
Mine is almost the exact set up but right handed and I run a 2.5x10 scope as it is the only one I like that clears the bolt handle.

I shoot either hand and had a lefty axis 22-250 I shit canned after loosing a deer last year then got a screaming deal on eBay for the chassis. I need to photo some more representative targets, five shots in a dime size hole is what I’m now getting at 100yds at least half the time. The other half I screw up and pull one. Favorite thing about this Swift 8-32 scope, at 100yds I can choose what part of the bullseye to shoot /jk.



Sent from my iPhone using Tapatalk