10 FCP-SR with a couple changes

[JoeJoe]

Here's a quick pic of my 10 FCP-SR after flush mount magazine and smaller bolt handle.....sorry for the cell phone quality. Also shown are a Bell/Carlson M40 stock and a muzzle brake of which I can't remember the manufacturer.

I'm hoping to work up a 168gr HPBT load over the winter, just not digging the factory loads at the moment (though I haven't tried too many different types).

https://66.media.tumblr.com/46c6017f260a3d493772fa43a1713331/07d99557b8450d05-27/s540x810/6fb7472942e568873ebffee83384c58cf0a34ab7.jpg

[isacpotatoes]

What bullet maker? I've thought about trying out some 155gr OTM from Lapua, for velocity... Keeping in mind a 600-800yd rifle at 20" barrel.


Sent from my iPhone using Tapatalk

[JoeJoe]

Planning on Sierra match bullets......but to be honest, this rifle currently goes deer hunting, so might have to also look at something more suitable for deer.

[Robinhood]

Sierra's 165 GK and the 168 MK can use load data interchangeably. Varget is a good powder and a spicey load of around 44-45 grains shoots well in most rifles.

[Chris3.Drums]

Looks good!