10FP build

[PhilC]

After reading many build threads here, I decided to build one of my own in 22 Creedmoor. Components chosen:

--NSS 10FP action w/target accutrigger, stagger feed blind mag
--B&C Medalist originally bedded to action w/SSS recoil lug
--X-Caliber, 1:8, 26" 416R SS, 6 groove, cryo treated
--SSS recoil lug (waiting to order)
--Weaver extended 20moa base
--Vortex PST Gen 1 6-24x50 MRAD w/level and Seekins rings

Used action and stock purchased from classifieds here, lightly used scope/rings/level from another forum, everything else new. Barrel expected late Oct/early Nov.

Have 200 Nosler 6CM cases weight sorted, necked down, and ready for turning.

[Robinhood]

Get us some pictures when she is up and running Phil. How about some pictures of gods country while you're at it.

[PhilC]

I'll post build pics here RH. I've got everything on hand but the barrel and recoil lug. Hoping SSS gets a batch of lugs done before barrel arrives but have a back up plan in case they don't.

Here's the view from the deck overlooking our property in spring with Camas in full bloom...

6307

Have a shooting lane to 364yds on our property.

[PhilC]

Barrel arrived while on vacation last week (neighbor received for me). I couldn't resist screwing it on to see how it will look. Ordering the last few parts today and hope to be printing groups before Thanksgiving.

6412

[PhilC]

Barrel break in completed yesterday followed by short load test...

6447

Center group were break in and preliminary scope adjustments @ 25yds. Top left is 8rds at 100yds and more scope adjustments (still learning MRAD). Group at lower left of orange dot is 5rds, each a different charge weight, and measured .361".

Loads were 77gr Custom Comp seated .020" off the lands, H4350, CCI200, necked and turned Nosler 6 Creedmoor brass. Velocities for group at upper left ranged from 3377 - 3508fps. The last, at 42.2gr H4350, was a hot load producing 62fps jump over 42gr and accompanied with heavy bolt lift and flattened primer. The cluster of five were 3382/3426/3400/3437/3446 with charge weights increasing by .2gr each.

Quite pleased how this turned out.

[Dave Hoback]

Very nice Phil! Great rifle...great results!

[PhilC]

It's a real pleasure to shoot Dave, and for my first ever build, I'm ecstatic with its performance!