View Full Version : Hard vs Sav-2
nksmfamjp
09-22-2019, 11:23 AM
Ok guys, share some experience....which works better?
to get the sav-2 right, do I stone the stamped sear? If so, how?
also, are both hunting reliable?
Robinhood
09-22-2019, 11:40 AM
I have stoned sears several times. I have never found the need to stone a factory sear unless there was wear or damage. You do not need to stone a sear for the SAV-1, SAV-2, SSS or the Jard.
No Experience with the Jard.
Best triggers in my experience:
1. SSS
2. SAV-2
3. Shimmed Timney
If you need an in the trigger safety:
1. Accutrigger Target Red Blade
2. Accutrigger Varmint
Texas10
09-23-2019, 08:43 PM
Lots to be said for the inherent safety of the Savage Accutrigger, besides keeping the three position safety that you lose with some aftermarket triggers. I've known a couple of guys who have steel screws and plates in place of bone due to hunting accidents. Years of recovery still left them partially crippled.
Just say'n.
nksmfamjp
09-26-2019, 05:06 PM
Wow! So what are people doing for trigger in these things? Pretty quiet...
olddav
09-26-2019, 06:32 PM
Robinhood kind of covered it all but I’ll add that I have a SAV-2 on an old flat back set at 14oz. Works pretty good. I also have a 3 screw tuned trigger set at approx 2.5# and it also works pretty good.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.