Will a 110 6.5 CM Mag. feed 308's

[Shooter0302]

I've found a LH "Tactical" ?? in 6.5 CM, I have a 308 bbl. and am wondering if 308 rounds will feed through the 10 Rd. round Mag. that comes with the rifle ?

[agilmore01]

Pretty sure it will the ones that come with the Bergara 6.5 made by Magpul say so on the side.https://uploads.tapatalk-cdn.com/20190825/b66ff154ce16f0f13070d8160f3c44b4.jpg

Sent from my SM-N950U using Tapatalk

[isacpotatoes]

Short answer is yes. 308 ammunition will fit in it.

The 308 cartridge was designed before 243, 6.5, 7mm-08 and so on. The only exception with magazines, is some people who handload ammunition need special magazines for longer internal length.

There technically isn't such a thing as a 6.5 or 308 mag. They are called 308 mags out of convenience, and the fact that short action rifles all fit the same Over All Length (OAL) size cartridges within a bolt face family.

I believe the bolt face diameter for the "308 family" of cartridges is .473 inches or .473. Its been some time since I've checked. That bolt face diameter goes back to the 1880's around the time of the 1st Argentine & Belgian Mauser.


Sent from my iPhone using Tapatalk

[Shooter0302]

Short answer is yes. 308 ammunition will fit in it.

The 308 cartridge was designed before 243, 6.5, 7mm-08 and so on. The only exception with magazines, is some people who handload ammunition need special magazines for longer internal length.

There technically isn't such a thing as a 6.5 or 308 mag. They are called 308 mags out of convenience, and the fact that short action rifles all fit the same Over All Length (OAL) size cartridges within a bolt face family.

I believe the bolt face diameter for the "308 family" of cartridges is .473 inches or .473. Its been some time since I've checked. That bolt face diameter goes back to the 1880's around the time of the 1st Argentine & Belgian Mauser.


Sent from my iPhone using Tapatalk


OUT Fn STANDING !!