purchase a 10 stock for 110?

[Snowmon224]

I looked at a online picture of your rifle.
Not sure if it has the aluminum bedding block or not. If it does you can skip the bedding. Maybe skim bed the recoil lug.

It has nothing, not even pillars. It actually looks exactly the same as yours which is why it was so helpful. None of the other bedding posts I've seen had this style stock

[hamiltonkiler]

awesome. pillars are easy with a drill bit and a little wooden dial to tap em in. If you bed the front like this snug down the front of the action and let the tang in the back float a bit off the stock.

[Snowmon224]

Stock is just about cured for 24 hours and just finished with the scope base. I was able to fit 4 pieces of paper under it :eek:

[Snowmon224]

I probably won't get to shoot for a week or two but back to my original question. This is the stock I'm looking at. It says it's for a 10 but my action will fit and it says it's for detachable magazine and bottom bolt release. Should fit correct? I'm just concerned that it's for aics style magazines and not what I have

http://www.bellandcarlson.com/index.cfm?fuseaction=category.display&category_ID=1127

[olddav]

The link you supplied shows a stock that uses DBM. The action screw spacing is correct. You will need to add DBM to your gun or look for a hunting stock that uses a blind mag.

[yoda4x4]

I hope you don't mind me asking a question; I'm seriously interested. Why are you so interested in an aftermarket stock? Are you not seeing the accuracy you're hoping for? What's the accuracy of the gun right now? I believe you're going to use this as a hunting weapon right? What game and at what maximum distance will you shooting it at?

The reason why I'm asking all of this is that I have a 110 Tactical in 308 that shoots sub MOA with fairly inexpensive ammo and for me, the stock is not the limiting factor in the equation; I know that I am. Just curious if your stock is really the problem.

David

[Snowmon224]

I hope you don't mind me asking a question; I'm seriously interested. Why are you so interested in an aftermarket stock? Are you not seeing the accuracy you're hoping for? What's the accuracy of the gun right now? I believe you're going to use this as a hunting weapon right? What game and at what maximum distance will you shooting it at?

The reason why I'm asking all of this is that I have a 110 Tactical in 308 that shoots sub MOA with fairly inexpensive ammo and for me, the stock is not the limiting factor in the equation; I know that I am. Just curious if your stock is really the problem.

David

Fair question, Im definitely not seeing the accuracy I was expecting. Ive seen so many videos shooting sub and even half moa right out of the box with, like you, inexpensive ammo. Ive tried various ammos (no handloads) and my very very best was only 0.9 moa 5 shot group with hornady match eld ammo and really focusing on everything I was doing. Ive tried off bags, rest and bipod. It shoots about 1.5" but sometimes I dont even bother measuring because it opened up so much. It will be for hunting and I know thats still well within the ability to take game at 100 yards but I also like just target shooting too. Maybe it is all just me, I dont know, I was just expecting something better. I bedded the lug and scope base like posted on the first page and if it improves my accuracy, Ill be happy.

[Dave Hoback]

Fair question, Im definitely not seeing the accuracy I was expecting. Ive seen so many videos shooting sub and even half moa right out of the box with, like you, inexpensive ammo. Ive tried various ammos (no handloads) and my very very best was only 0.9 moa 5 shot group with hornady match eld ammo and really focusing on everything I was doing. Ive tried off bags, rest and bipod. It shoots about 1.5" but sometimes I dont even bother measuring because it opened up so much. It will be for hunting and I know thats still well within the ability to take game at 100 yards but I also like just target shooting too. Maybe it is all just me, I dont know, I was just expecting something better. I bedded the lug and scope base like posted on the first page and if it improves my accuracy, Ill be happy.

Just an fyi, as twice you mentioned “focus” for your best group. I don’t believe anyone achieves their best accuracy devoid of having extreme & deliberate Focus. I’ll go a step further and claim our best groups are achieved with carefully worked up loads.