300WM build

[A&8's]

It doesn't look like the "custom build thread" page gets much love around here. :confused: I have several I've done over the years. I'll try to dig up some pics of past personal builds and some I've done for customers.

Here's a 300WM I done for myself last year or year before, I can't remember.

Specs:
Stevens M200 action
Choate custom stock
Shilen 28" 1:10
Fat Bastard brake
Warne 20moa base
Leupold vx3i scope

All work done by me: Action blueprinted, barrel blank spun up (chambered and threaded), full length action bedding.


https://i1348.photobucket.com/albums/p723/RDTague/E961CFA9-8B50-4D2A-8B44-38C0FFA30CDE_zpszeh705zk.jpeg
http://i1348.photobucket.com/albums/p723/RDTague/618EB7F0-7086-4AE0-8B2B-29E4C49265F2_zpsqk53geyh.jpeg


Here's a group while I was checking for vertical correction on the scope.

http://i1348.photobucket.com/albums/p723/RDTague/0C2F102F-73FE-45D9-9F9F-344C2695AB07I_zpsnej9nz03.jpg

[J.Baker]

We just reinstituted this board this past week. We had a similar board for several years and it got a lot of interest for awhile, but then it tapered off so I merged it with another board. I'm hoping that by bringing it back it will get guys talking about their builds and projects a little more than just asking the occasional question to sole a problem they ran into.

[big honkin jeep]

Slick looking rifle with plenty of giddy up. What's not to love :rockon:

[mudpig]

Very nice looking and shooting rig!!!

[mudpig]

What load are you using and did you use something other than a SAMMI spec reamer for that?

[A&8's]

What load are you using and did you use something other than a SAMMI spec reamer for that?


Standard reamer.

Hornady brass, 220gr ELDX, 64.1gr of H4350 (2726fps, 3.6SD), WLRM

[mudpig]

Sweet shooting. Looks the you found "THE LOAD" :p