View Full Version : Scope mounting
Minooka
02-28-2019, 05:51 PM
Should i use loc tite on the screws for the rings
Jester560
02-28-2019, 06:01 PM
Use blue loctite, yes
Sent from my SAMSUNG-SM-T337A using Tapatalk
Bigbuckdn
03-01-2019, 01:58 PM
Yep blue
Robinhood
03-01-2019, 03:54 PM
Why? Asking for a friend.
scootergisme
03-01-2019, 04:05 PM
I have never used Loctite on scope ring screws and I have never had any scope ring screws back out. If you want to use Loctite on your rings screws, use it.
Bigbuckdn
03-01-2019, 04:59 PM
Why? Asking for a friend.
I use it to safe guard from a screw loosening and blue won’t hurt if he need to take screw out
Jester560
03-01-2019, 05:32 PM
I never use loctite. I use red fingernail polish.
Sent from my SAMSUNG-SM-T337A using Tapatalk
Bigbuckdn
03-01-2019, 08:28 PM
I never use loctite. I use red fingernail polish.
Sent from my SAMSUNG-SM-T337A using Tapatalk
On the threads? or over over the screw when tight because I have done that before but not on threads
i would think on threads it would be very hard to get out?
Jester560
03-01-2019, 08:31 PM
On the threads? or over over the screw when tight because I have done that before but not on threads
i would think on threads it would be very hard to get out?On threads. Holds like red loctite but breaks loose like blue loctite.
Sent from my SAMSUNG-SM-T337A using Tapatalk
Bigbuckdn
03-01-2019, 08:56 PM
On threads. Holds like red loctite but breaks loose like blue loctite.
Sent from my SAMSUNG-SM-T337A using Tapatalk
nice to know
What about blue fingernail polish????:bolt:
Robinhood
03-02-2019, 12:10 AM
I have never had screws back out. Do you torque them? I think If I had to use it I would use the purple 222
I have only used Blue(and red) Loc tite on screws in extreme service. My $.02
celltech
03-02-2019, 12:16 AM
I have to think it's impossible to "hold like red but break loose like blue". Red loctite takes 500+ degrees to break its bond. I used to use blue but have moved the lighter purple 222. Just enough to ensure it does not move.
DeltaNu1142
03-02-2019, 02:50 AM
I used blue on my OEM scope rail screws the other day. It breaks free easily enough that I'll probably throw some on the ring screw threads as well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.