PDA

View Full Version : Rebarreling to 450BM


A350Beretta
02-27-2019, 02:56 AM
Need help deciding which action to use for 450 Bushmaster. Also, is the Savage 18519 from northland shooters supply the same as savage 10,11,12, or 16?

http://northlandshooterssupply.com/actions/savage/
DeltaNu1142
02-27-2019, 04:27 AM
Wow, those are spendy. Once you find the right action, I'd probably try to find a donor rifle with the action I needed.

Also, there's probably no need to start multiple threads (http://www.savageshooters.com/showthread.php?63648-Savage-18519-450-Bushmaster).
J.Baker
02-27-2019, 11:28 AM
At those prices I'd just go buy a complete rifle. Heck, you can find new factory take-off short-actions in our classifieds quite regularly for $300 or less.

As for your question regarding the 18519 action, that's just Savage's SKU# for it. Yes it's the same as a 10/11/12/14/16 action other than it is "in the white" and needs blued or parkerized.
BB68
02-27-2019, 01:01 PM
450 bushmaster is an AR-15 cartridge. If I were to build a short action bolt I would lean toward 45 raptor. Which is exactly what our local gunshop does and they sell a boat load for our deer season(Iowa).
A350Beretta
02-27-2019, 02:02 PM
Thanks guys I appreciate the info and I’m not a reloader so 450 Bushmaster seems to make more sense for me.
micky_blue
03-01-2019, 07:15 AM
If you want more juice than a 450 BM, converting a WSM to 450 Marlin is just as easy. If you want less recoil the new 350 Legend on a 223 bases action would work too.
charlie b
03-01-2019, 10:21 AM
One of my builds is going to be a .450 Marlin. I have always wanted a single shot .45-70 but did not want the limitations of a falling block. I could shoot it using smokeless, BP or duplex loads.

I agree with above about actions. Just buy a complete rifle and you will have money left over, especially if you can sell the barrel. Something like a Cabela's 12FV with rebates or on sale.

Used is even better route since actions are rarely an issue on used rifles.
overtheir
03-03-2019, 07:22 PM
Hi I used a model 10 in 308 that way I did not have to fool around with it the "rim " of the case I also used a boyds stock and a Mcqanne barrel 1 in 16 twist 18 inches long , get your self a go gauge and it takes 10 minutes to head space Im still in the process of breaking the barrel in