Scope base options

[bowkill02]

I have recently finished my first savage re barrel. I chose a 1-11 CBI CHAMBERED IN 20practical. I bedded the action in a boyds thumbhole stock and it looks classy. I was hoping for a 2pc mounting system preferably leupold. But I don't like the way the rear base over hangs the reciever. I'd like to ask what most of you folks are using on your model 10s. I'm trying hard to avoid the tactical look of picatinny rails. Thank you in advance for your suggestions

[SageRat Shooter]

I have used the 2-piece weaver mounts on my Axis chambered in 22-250... However, I have a pretty long scope (Redfield TAC-MOA 6-18x44). I just barely have enough "play" to set my eye relief. Both of my long action rifles have 1 piece Picatinny rails, which I have come to prefer.

[J.Baker]

DNZ Products GameReaper (1-pc) or Hunt Master (2-pc). Extremely lightweight, CNC machined from billet and while not what I'd consider cheap they're not terribly expensive either.

www.dnzproducts.com

[RustyShackle]

I like Leupold products in general. I do like the quality of their rings/bases but dislike the overhang too, it didn’t affect function of the rifles but it didnt look aesthetically pleasing to me.
I think I have several sets of Leupold stainless bases rings, new in the package. As well as 1 set that was on a rifle. All are stainless if anyone is looking for a set.

I ended up switching to Picatinny rails and weaver style bases. I think I like the Warne steel weaver style bases the best.

[Stumpkiller]

Two piece Warne steel on my M11

The M912 will fit the M10/110

https://warnescopemounts.com/product/m912912/

5602

https://warnescopemounts.com/product-category/bases/2-piece/

[bowkill02]

Two piece Warne steel on my M11

The M912 will fit the M10/110

https://warnescopemounts.com/product/m912912/

5602

https://warnescopemounts.com/product-category/bases/2-piece/That's nice. I think that's my solution. If Any more ideas out there keep them comig. That's guys for the suggestions

Sent from my SM-N910V using Tapatalk

[jpdown]

Weaver Grand Slam steel bases (405s, 46s) and Burris Signature Zee rings give a nice, clean classic look.

[Stumpkiller]

Here they are in place. With Warne steel rings. I think it's a clean and strong design.

5603

[bowkill02]

That's definitely the look I am going for.


Sent from my SM-N910V using Tapatalk

[Starfighter_F104X]

I use the Farrell steel base 0 Moa in my savage 10 PH

[Orezona]

https://www.talleymanufacturing.com/product-category/lightweight-alloy-scope-mounts/?filter_product_tag=savage-2&query_type_product_tag=or

These are my favorite. I have them on a muzzle loader, 10 PC carbine .223 and Predator Hunter 6.5 Creedmoor.