PDA

View Full Version : Cannot figure out what scope ring height I need



Pages : 1 [2]

tobnpr
01-16-2019, 07:37 PM
Someone correct me if I'm wrong here but I plan to go with the Primary Arms 3-18x50 ACSS HUD reticle. This scope you are suppose to zero in at 100 yard and then leave it alone.

Wouldn't I be fine going with a 0moa rail in this situation?

Short answer, absolutely yes; with that optic and the .308 Win.

Primary Arms specs over 27 mils of elevation adjustment- meaning roughly 13 up (and down) is available.
13 mils is more than you'll need for the .308 at any range you'd realistically shoot it.

Down-angle bases are a must for optics with more limited vertical adjustment. All it does, is allocate more of the total adjustment available to "up" where it's needed- and less to "down", where you'll never use it...
Plenty of elevation adjustment available on that optic.

My .308 needs just under 11 mils at 1000 yards from a 100 yard zero.

deerhunter99
01-16-2019, 07:56 PM
I put a EGW rail on my 116ww and I had to us HI rings for a 3x9x40 scope !!!!