View Full Version : SSS Low Profile Benchrest (LPBR) barrel contour size...
Red Dog Leader
12-24-2018, 07:16 PM
Building a 6MMBR Norma on a old 12 22-250 I no longer shoot much.
Barrel will probably be ordered from NSS
Like the looks and cost of the stock from SSS, but it says its "Inlet for Varmint-weight barrel contour"
Any body using this stock what contours have you gotten into it. Any bigger than the Varmint contour?
Was thinking 26" long, Criterion Varmint contour for 100-300 yard shoots
Thanks, Red
psharon97
12-24-2018, 09:54 PM
I would email Lisa at SSS and question her about the largest diameter barrel that you can use with their stock. I have their LVT stock and I love it. I spec'd the rifle out for a bull contour 1" in diameter barrel.
South Prairie jim
12-25-2018, 09:19 AM
A person can open up the barrel channel quite easily with a socket wrapped in sand paper. Start with 120 grit. This process only takes a few minutes. FYI you might be waiting a while for Fred , I've heard 15 months!
blvedere
12-26-2018, 12:00 AM
A person can open up the barrel channel quite easily with a socket wrapped in sand paper. Start with 120 grit. This process only takes a few minutes. FYI you might be waiting a while for Fred , I've heard 15 months!
It took 19 months to get my stock from SSS. Would not do it again.
Dennis
12-26-2018, 07:31 AM
Any body using this stock what contours have you gotten into it. Any bigger than the Varmint contour?
Mine is sitting right next to me. Definitely channeled for a Bull Barrel 1"
Pictures on request, Dennis
South Prairie jim
12-26-2018, 08:49 AM
You finally got it" that's good to hear.
i came across a Dog Tracker last week and jumped on it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.