PDA

View Full Version : HELP: Trigger binding up in new stock.


glockeyed
10-06-2010, 05:05 PM
I need help as to where to look to try and fix this.

savage 12 4.4 centerfeed. everything fits, front action screw snug-tight, back action screw once it goes past "finger tight" the trigger locks up.

at first it only did it when i tried to assemble with the action and stock facing up.
drybean
10-06-2010, 05:25 PM
trigger is binding in the stock
remove material where it is touching
glockeyed
10-06-2010, 07:25 PM
trigger moves when bolt ISN'T in the action.
drybean
10-06-2010, 08:07 PM
check to see if the bolt handle has full travel or binding on the stock
hailstone
10-06-2010, 10:15 PM
Trigger is binding on top side front edge of trigger guard trigger opening would be my guess.
richard_p57
10-09-2010, 01:08 PM
What stock?
glockeyed
10-09-2010, 03:33 PM
the new "bobby hart" LRT (http://www.stockysstocks.com/servlet/the-502/*NEW!*-Bobby-Hart-Long/Detail)

right now i have it torqued to about 35in lbs. much more past that and the blade and trigger locked TIGHT. I haven't tried anything heavier, but it just shot a couple of 5rd .4 MOA with 69gn black hills. not sure if i should worry about it. :D