rick3
11-02-2018, 05:56 PM
I’ve watched the video for the SSS improved ejection kit, and I’ve been able to remove the old extractor, spring, and ball. I’ve been struggling to push out the pin to get the old ejector out. My smallest pin punch (1/16”) is too big, so I tried using a piece of music wire that fits, but that doesn’t work. That pin must be in there very tight; the music wire just bends.
Anyway, I’m thinking that I need a smaller actual punch but I can’t find anything smaller in the local hardware store, and even Google doesn’t bring up any results for punches smaller than 1/16.
Is there such a thing as a 1/32 punch, or do I need a special tool? Any suggestions from people who have installed the SSS improved ejection kit are appreciated.
Anyway, I’m thinking that I need a smaller actual punch but I can’t find anything smaller in the local hardware store, and even Google doesn’t bring up any results for punches smaller than 1/16.
Is there such a thing as a 1/32 punch, or do I need a special tool? Any suggestions from people who have installed the SSS improved ejection kit are appreciated.