Setting headspace?

[celltech]

I only have the go gauge.

So did you mean it closes on the GO, but won't close on the GO+.003 shim? In that case I would say you are likely ok. What caliber is the rifle? Is .0032 the SAAMI difference between go/no go for that round?

[justinp61]

Sorry guys, I see where I used "no go" it should've been "go", I apologize for the confusion I caused.

It's a 260 Remington, the go gauge is 1.630", the no go is 1.634".

[justinp61]

Guys it's together and shooting. The fired brass measures out of the new barrel measure .001" longer at the shoulder than the fired brass fired in the old barrel.


Thanks for all the help.