View Full Version : Mark I/II/93R: torque for receiver screws ?
If I take the stock off my Savage MK II to adjust the trigger do I need to torque them when putting the stock back on ?
I should have said action screws.
JASmith
10-12-2018, 09:30 AM
I know there are recommended torque settings for the 10/110 series.
Do a search for “torque for action screws in Savage MK II” and see what pops up.
JASmith
10-12-2018, 08:33 PM
You're welcome!
BTW, please post what you learn -- others will appreciate the insight.
I found between 13 and 18 in lbs from various peoples posts
JASmith
10-13-2018, 08:46 PM
I found between 13 and 18 in lbs from various peoples posts
Thanks!
Sounds like 15 in-lb would be a nice middle of the road for Savage rimfire rifles. Centerfire stocks might see twice or almost three times that much per the references I found.
Jester560
10-14-2018, 05:43 PM
Torque the front screw first and then the rear. I have found mine to be more accurate with the rear svrew not as right as the front. Your rifle may react differently.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.