PDA

View Full Version : Peterson brass 308



69gen1
07-14-2018, 05:39 PM
Anybody ever tryed this out..thinking about trying it out about $40 for 50 rd..ships in plastic reloading box from grafs and son...

snowgetter1
07-14-2018, 07:15 PM
I bought 100 for my buddy's 358 win. Seemed good loading them. No reloadings in them yet.

lonestardiver
07-14-2018, 07:20 PM
I have no personal experience with them but was told it is pretty good brass.

69gen1
07-14-2018, 09:05 PM
Thanks ..they also have brass from kinectic which is usa mfg. under grafs brass listed as 308 match

ktmracer358
07-14-2018, 10:01 PM
I'm running there small rifle primer 308 brass now. It is awesome. I consistently get standard deviations in the single digits. Would not hesitate to buy again.

Sent from my SM-G960U using Tapatalk

69gen1
07-15-2018, 04:35 AM
Anybody ever tryed this out..thinking about trying it out about $40 for 50 rd..ships in plastic reloading box from grafs and son...

That sounds great..beleave I give the lrg rifle 308 a try..

Txhillbilly
07-15-2018, 12:26 PM
I've got 100 pcs of their SRP 6.5 CM bass. It's nice brass,but it has even less volume capacity than Lapua brass.
I can't get the velocity out of the Peterson brass that I get from the Lapua or Nosler brass without showing high pressure.

69gen1
07-15-2018, 02:59 PM
I've got 100 pcs of their SRP 6.5 CM bass. It's nice brass,but it has even less volume capacity than Lapua brass.
I can't get the velocity out of the Peterson brass that I get from the Lapua or Nosler brass without showing high pressure.
......dang hate to here that...extra thick I guess..

ktmracer358
07-15-2018, 04:03 PM
With my 308 brass I have had no problem getting above published velocities based upon load data with my 26in Barrel vs. 24-inch Barrel velocity stats

Sent from my SM-G960U using Tapatalk

ktmracer358
07-15-2018, 04:10 PM
Using 42.2gr of varget I'm getting an average veloicty 2680 and a sd of 7. With the publish load data they're getting 2680 at 43.3 grains with a 24-inch Barrel versus my 26 inch barrel

Sent from my SM-G960U using Tapatalk

69gen1
07-15-2018, 04:20 PM
Using 42.2gr of varget I'm getting an average veloicty 2680 and a sd of 7. With the publish load data they're getting 2680 at 43.3 grains with a 24-inch Barrel versus my 26 inch barrel

Sent from my SM-G960U using Tapatalk
That's great news..how many reloads u got on them so far

ktmracer358
07-15-2018, 04:39 PM
3 firings so far

Sent from my SM-G960U using Tapatalk

ktmracer358
07-15-2018, 04:46 PM
Corrected I just loaded up the 3rd firing

Sent from my SM-G960U using Tapatalk