MashTun
06-30-2018, 05:59 PM
Hello all,
I had been looking for a .223 or .22-250 for target and varming hunting for a while. I knew I wanted something in that caliber and with a heavy barrel. I'm not a huge fan of Dicks Sporting goods stores as of late but I happened to come across their exclusive 11VT today in .223 on clearance for $349 and couldn't pass it up. I bought the last one left in .223 and it was the floor model.
I get the rifle home and start the cleaning process. Everything looked okay and then I noticed an anomaly with the crown. Looking down into the muzzle end the hole appears lopsided due to an angular indentation approx. an 1/8" wide around the crown, almost as though a rod was pulled out of the end of the barrel at an angle and with enough force to move some metal. I can't tell if this is excess metal or if it has been pulled out of barrel. I used a 16X jewelers loop to get a better look and I could see uniform grooves into this piece of metal which made me think it was made durig rifling. Any rate, it's clealry visible and I've no idea how it passed inspection.
I'm assuming that would impair accuracy?
I have yet to shoot the rifle and am unsure what to do next. Do I just shoot it and see how it shoots or send it back to Savage? I could probably have it cut and recrowned locally but I'd be concerned finding a gunsmith capable of doing a professional job.
Any and all in put would be appreciated. Thanks.
I had been looking for a .223 or .22-250 for target and varming hunting for a while. I knew I wanted something in that caliber and with a heavy barrel. I'm not a huge fan of Dicks Sporting goods stores as of late but I happened to come across their exclusive 11VT today in .223 on clearance for $349 and couldn't pass it up. I bought the last one left in .223 and it was the floor model.
I get the rifle home and start the cleaning process. Everything looked okay and then I noticed an anomaly with the crown. Looking down into the muzzle end the hole appears lopsided due to an angular indentation approx. an 1/8" wide around the crown, almost as though a rod was pulled out of the end of the barrel at an angle and with enough force to move some metal. I can't tell if this is excess metal or if it has been pulled out of barrel. I used a 16X jewelers loop to get a better look and I could see uniform grooves into this piece of metal which made me think it was made durig rifling. Any rate, it's clealry visible and I've no idea how it passed inspection.
I'm assuming that would impair accuracy?
I have yet to shoot the rifle and am unsure what to do next. Do I just shoot it and see how it shoots or send it back to Savage? I could probably have it cut and recrowned locally but I'd be concerned finding a gunsmith capable of doing a professional job.
Any and all in put would be appreciated. Thanks.