tobnpr
02-21-2018, 09:29 AM
Still a bad link, at least for me... is the one referenced for a shouldered, or std. (non-shouldered) Savage barrel?
For a shouldered barrel, there's a commercial system by West Texas Ordnance (Switchlug) that uses a split recoil lug and clamping screw...
For that matter, I haven't done it- but I honestly don't see why- for a shouldered barrel- one couldn't use a thick precision lug, pin it to the receiver (as commonly done with 700's), - and then drill/tap it for a grub screw to hold the barrel in place after it's indexed. Loosen the grub screw, unscrew the barrel, screw the next one in place.
For a shouldered barrel, there's a commercial system by West Texas Ordnance (Switchlug) that uses a split recoil lug and clamping screw...
For that matter, I haven't done it- but I honestly don't see why- for a shouldered barrel- one couldn't use a thick precision lug, pin it to the receiver (as commonly done with 700's), - and then drill/tap it for a grub screw to hold the barrel in place after it's indexed. Loosen the grub screw, unscrew the barrel, screw the next one in place.