No_Style
09-19-2010, 06:17 AM
Does anyone know where (if) there exists published exploded views and/or schematics for rifles (particularly savage rifles...specifically a 10 FCP-K)?
In particular what I'm chasing is some measurements of the outer diameter of the barrel and receiver (yes I could measure them, but the thing is with the gunsmith for a little while yet)...
The purpose is actually to try and work out what the lowest height rings are that I need for a (Falcon Menace, 44mm objective with outer objective diameter of 52mm or 2.05 inches) to clear the barrel/receiver....
For what its worth I know Leupold Medium 30mm QRW rings on a Warne Weaver Rail will clear the barrel with a fair margin for error (1/8 of an inch or so), but the low rings won't...
Going to get an EGW HD F-Class extended rail and some new rings (probably the EGW HD Tactical rings unless someone has better suggestions)...
In particular what I'm chasing is some measurements of the outer diameter of the barrel and receiver (yes I could measure them, but the thing is with the gunsmith for a little while yet)...
The purpose is actually to try and work out what the lowest height rings are that I need for a (Falcon Menace, 44mm objective with outer objective diameter of 52mm or 2.05 inches) to clear the barrel/receiver....
For what its worth I know Leupold Medium 30mm QRW rings on a Warne Weaver Rail will clear the barrel with a fair margin for error (1/8 of an inch or so), but the low rings won't...
Going to get an EGW HD F-Class extended rail and some new rings (probably the EGW HD Tactical rings unless someone has better suggestions)...