PDA

View Full Version : PRS comp stock for staggerfeed SA?


mattri
12-12-2017, 09:16 PM
Looking for a stock to use in some upcoming PRS shoots.

Running a SA staggerfeed.

Thoughts?
penna shooter
12-13-2017, 08:02 AM
Good luck with the shoot....Make us proud...
LoneWolf
12-13-2017, 09:00 AM
Get something you can have inlet for bottom metal and 10rds magazine. Probably the easiest route to go is a LRP or look at the HS Precision stock that the LRP uses. Depends on what kind of money you're willing to put into it.
darkker
12-13-2017, 02:03 PM
Good luck with the Comp!!!
If it interests you, look at the MDT stocks. I like my LSS, takes any AI style mag. Running Magpul currently.
MI223
12-19-2017, 02:32 PM
I run a xlr element chassis and like it. Like others said. Pick what you like and get it running aics style mags. Most chassis are set up this way if you go fiberglass cdi will inlet your stock for their bottom metal

Sent from my SM-G930P using Tapatalk
mattri
12-19-2017, 03:18 PM
How would that work with a staggerfeed action?
MI223
12-20-2017, 10:37 AM
When you switch to an aics bottom metal or chassis and mags. You remove the factory mag box and everything should be ready to go.

Sent from my SM-G930P using Tapatalk
MDTcorp
12-20-2017, 12:08 PM
The MDT ESS was specifically designed for competitions. https://mdttac.com/products/ess-chassis-system
mattri
12-20-2017, 06:52 PM
Great info thanks.

Sorry to be obtuse but I just send CDI my staggerfeed action with attached mag and it comes back set up for dbms?
darkker
12-20-2017, 06:56 PM
They aren't inletting for the factory mag, that is already done. You send them your stock(or stock and rifle) and they inlet it for THEIR DBM system.
mattri
12-21-2017, 05:02 PM
And they modify the action/existing mag in such a way dbms can attach/detach?
MI223
12-22-2017, 02:01 PM
Your existing mag is removed and no longer used. It will be replaced by aics compatable detachable magazines.

Your stock will need to be inlet to accept there bottom metal. The bottom metal contains the latch for the new aics magazine.

Hope this clears things up. Google cdi precision gun works. There should be some good info there for you

I do not believe you need any modification to the action. My center feed did not i assume your staggered feed will be the same.

Sent from my SM-G930P using Tapatalk