1st Gen short action 110

[eliwhitley]

I am looking for magazine, follower, floor plate and trigger plate for a short action (308)with 4.5" screw spacing. Any help would be appreciated

Thanks Eli

[J.Baker]

If Numrick's doesn't have them you'll be digging through parts boxes at the local gun shows trying to find them as Savage hasn't manufactured them for more than 10 years now.

[Ted_Feasel]

I am looking for magazine, follower, floor plate and trigger plate for a short action (308)with 4.5" screw spacing. Any help would be appreciated

Thanks EliIt's worth finding... I believe that action is machined from forged bar stock.. I would think there are aftermarkets... midway has a pretty deep selection of 110 components

Sent from my SAMSUNG-SM-G935A using Tapatalk

[LLOYD17]

Try (actually call and ask they're super nice)

https://jack-first-gun-parts.myshopify.com/

I'm pretty sure they had the long action floor plate I needed for a 1963 30-06. The earlier ones use a tapered floor plate. I used another site for some other parts but I'd have to dig it up....maybe it was this one:

http://www.hoosiergunworks.com/index.html

Good luck.