Muzzle brake help needed

[JPN800]

I just picked up a Model 10 SBA in 6.5 (dicks exclusive) with a threaded barrel, I'd like to get a brake on it. Does anyone make a 5/8-24 brake with a .830" O.D. to match up to the O.D. of my barrel? I looked around but i can only find tapered brakes.

[wbm]

Give this one a try. http://muzzlebrakesandmore.com/

[teele1]

+1 on Muzzle Brakes and More I LOVE the two i have

[drybean]

+2, I have one off his self timing brakes
works great

[Zero333]

I like the look of a brake that is slightly bigger in circumference than the muzzle of the barrel.

3733

[Steelhead]

+3
I use a MBM self timing brake.
Works very well and installed easily.

[LoneWolf]

If you check out Kahntrol Solutions you won't be unhappy! I believe the 3gun brake matches up to that barrel perfectly! I have not experienced a better brake to date! I've been running the CWES Hexmod for the last year!

[Zero333]

If you check out Kahntrol Solutions you won't be unhappy! I believe the 3gun brake matches up to that barrel perfectly! I have not experienced a better brake to date! I've been running the CWES Hexmod for the last year!

I have a Kahntrol brake (clamp-on on a 1" muzzle) and it's the best brake I've ever owned and used. It gets rid of most of the recoil on a 300winmag but it also give the biggest concussion blast. Not kidding when I say my 17 lb 300winmag target rifle's recoil feels the same as 5.56 AR-15.

[bsekf]

Harrell's http://harrellsprec.com/index.php/products/muzzle-brakes

Muzzle brakes all look like a blob on the end of your barrel. Harrell's work, don't have to be indexed and the price is right. Using a bolt the right size I made a jig and used my drill press and a file to blend it to my barrel diameter.

Bill

[JPN800]

Thanks guys, great looking brakes, most likely going with a MBM 4 port.

[Steelhead]

Thanks guys, great looking brakes, most likely going with a MBM 4 port.
Watch his video comparisons.
Because of them I went with his three port on my 260.

[Lou Tenant]

I bought a Harrels for my .300 win mag . I couldn't believe the difference, and the customer service and price were excellent.

[wbm]

Had a very good experience with Harrels also.

[JPN800]

Had a very good experience with Harrels also.


Did you go with a 4 port or a radial port?

[Lou Tenant]

I went with the radial.

[JPN800]

Ok so I went with a Harrell's radial brake. It came in kinda rough but I have a lathe at work and I was able to turn it down to size and bore it to the correct specs, I then finished it with a light bead blast. I'm happy with the results.

[JPN800]

Ok so I went with a Harrell's radial brake. It came in kinda rough but I have a lathe at work and I was able to turn it down to size and bore it to the correct specs, I then finished it with a light bead blast. I'm happy with the results.

https://uploads.tapatalk-cdn.com/20171017/09d01df7ccb80d7e2e81a79bb92bb235.jpg

Here is the pic, it's in a Bell and Carlson stock. Just deciding on a scope now.



Sent from my iPhone using Tapatalk

[Steelhead]

I shoot prone on dirt a lot.
Radial doesn’t work for me.
Looks good though.

[deerhunter99]

A muzzle brake on a 6.5, come on man up !!!

[Steelhead]

A muzzle brake on a 6.5, come on man up !!!

It’s not about being a stud.
Maintaining a position and spotting your own hits really are great attributes to have.