Accustock? Just wondering....

[clerkofkirk]

What "bottom metal" does it take to put a TBR, Centerfeed, accutrigger SA from a 12FV into an Accustock?

Would an Accustock from an 11FCNS work? If not which Accustock would work?

Is it worth it? (i'm quite happy with a blind magazine. Never load more than two or three rounds. And I lose things, i.e., magazines)

[jpdown]

I believe the Accustock inlet is set up to accept a BBR TG and the standard Savage SA metal DBM frame assembly (surround) and magazine bottom metal plate. If you're getting acceptable accuracy with the 12FV stock, I would not change it out, since the Accustock and metal bottom parts will add additional weight over the blind magazine and 12 FV synthetic stock.

[RP12]

Sorry doubled up.

[RP12]

Your 12FV trigger guard should work with the BBR bottom metal frame. You need to do a little relief sanding for the TBR clearance for a BBR accustock to work, or just find a TBR accustock.