Savage 11 convert from .308 to .223

[homer76]

Hey everyone,

I have a Savage 11 in .308 that I would like to convert to .223. It is a centerfeed, factory DBM, top bolt release, no accutrigger (phew, I wish Savage would just stick with one design). I have no issues with changing the barrel and have the bolt head with parts. I was just wondering if the DBM will take a .223 magazine?

Thanks in advance.

[sharpshooter]

Yes, all of the short action magazines will fit into your magazine frame.

[hereinaz]

Yes, all of the short action magazines will fit into your magazine frame.The .223 magazine is the same as .308, but savage rivets in a spacer pushing the cartridges forward, and uses a shorter follower and spring.

Some .223 baffles have a little wing that shortens the stroke on the bolt as well.

Sent from my SM-G920V using Tapatalk

[foxx]

^^^^Not quite. The mag box, spring and follower for the .308 is considerably different than the .223.

Both use the same bottom cap and bottom metal/frame for the stock.

[homer76]

Thanks for the replies everyone!

[hereinaz]

^^^^Not quite. The mag box, spring and follower for the .308 is considerably different than the .223.

Both use the same bottom cap and bottom metal/frame for the stock.True.

My point was the magazines are pretty much the same exterior shape and size. It is the guts inside the .223 magazine that has a spacer for a smaller follower, and of course the feed lips, etc. So, you can't change a .308 to .223 or the other way.

Sent from my SM-G920V using Tapatalk