Any Axis 6.5 Creedmore owners out there?

[smbob]

Love this caliber. Buds has Axis in 6.5 Creedmore for under $300 shipped. Thinking about getting one by the end of the year. If anyone here owns one or has shot one please let me know what you think of it.

Robert

[DrThunder88]

I have one. It's a standard Axis: terrible trigger, cheap stock, long action irrespective of chambering. I did a "super stock" version where I shimmed the trigger, installed a cheek riser, and I may have put Rockite in the wrist. I brought the super stock along to shoot alongside a full custom Axis in 6.5 Creed at long range. Really there was no comparison at 100 yards or 1000 yards, but it was up against a much more developed gun. I suspect that by using a lighter trigger spring I could close the gap a bit, but it would take a lot more to really eke the potential out of the cartridge.

[gardnr1]

I too am looking for the 6.5 but I plan to convert my 308

[homefrontsniper]

I too am looking for the 6.5 but I plan to convert my 308


.308 y ?

[gardnr1]

.308 y ?
i have multiple .308 and wanted to get into a budget 6.5 gun seemed like the best option vs re barrel a rem 700 action .

[racer55]

I converted a .308 axis to 6.5 creedmoor using a x-caliber barrel and Boyds prairie hunter stock and rifle basix trigger-would have been cheaper to buy premade creed but no fun in that.
need to spend more range time though to give any reports

[Rocketman99]

Racer55 - Who did your barrel? Thinking of doing the same to my 270 Win and there seems to be a lot of good talk on X-Caliber barrels

[Rosco]

Chris, your Creedmore did just fine!! Don't let him fool you he was banging steel at 1100 yards.

[racer55]

Racer55 - Who did your barrel? Thinking of doing the same to my 270 Win and there seems to be a lot of good talk on X-Caliber barrels
I bought the barrel from "Rosco" here and installed it myself with headspace gauges from Brownells and tools from amazon=action wrench and nut wrench,have barrel vice as well but didn't really need it.

[Rosco]

Hope it shoots well btw!!

[James John]

I just picked one of these up. Gonna chop barrel down 4 inches and thread for my supressir