PDA

View Full Version : 62/64-Series: Last round jam



bulldog
07-16-2017, 07:49 PM
Looks like there's a lot of problems with the 64 mags. Mine is a little weird, I think. 9 of the 10 run without a hitch, BUT the last one catches on the chamber entrance - looks like the bullet hits the bottom of the chamber. Read about loading fewer so I tried that - no joy. Even if I put only 2 in the mag, last one jams. I've used CCI Blazers, Mini Mags, and Stingers, Remington Yellow Jackets, Winchester Xperts and Armscor. And I did clean the rifle before trying again today. This has me stumped - always the last round. Any suggestions?

Jimk
07-21-2017, 07:46 AM
My 64 had bullets deforming on the sharp bottom edge of the chamber. I used a piece of 1000 grit sandpaper to gently sand the 6 o'clock position of the chamber and I have no more jams. It doesn't take much....piece of sandpaper on fingertip and gently rub. Don't overdo it.

bulldog
07-21-2017, 06:51 PM
Thanks Jimk. I'll give it a try