Pre-fit butt pad

[CJP1]

I recently purchased a MKII BV. I want to keep the same LOP. I just don't like the way the plastic one slides around on my shoulder. Does anyone know where I can find a pre-fit butt pad to replace the plastic one?

[drybean]

Pick out your favorite flip flop , cut & glue

[LoneWolf]

I've used the Grind to fit pads from Kick-EEZ a couple of times now. They are easy to work with and you can order them in a size that allows you to adjust Length of pull if needed. With a bench Grinder or belt sander you can quickly get them shaped up and installed. They provide their grinding instructions with the pads and I never found a reason to do it any differently.

[Nor Cal Mikie]

There's also a "slip on".

[CJP1]

Thanks for the replies. Looks like the grind to fit is the way that I'll go. Flip flop and slip on wouldn't be as clean looking.

[CJP1]

In case anyone else is interested in replacing their thin plastic or metal butt pad. I found the grind to fit Pachmayr 500B. It has a basketweave surface and is .4" thick.

[Underdog]

Pachmayr 500B is it the Small, Medium, or Large, which is the correct size for the mark II?

[CJP1]

Underdog,
The small one fits on the MKII BV laminated stock.