Savage 40 (or greater) MOA scope rail.

[DonB]

Anyone know who makes a really good 40 MOA or greater heavy duty scope rail for a Savage round back, long action with the 8-40 mounting screws?

[Deadshot2]

If you can't find the 40 MOA rail, take a look at the Barrett ExRings. Front ring has a pivot and rear ring allows you to select either 15 MOA or 40 MOA with precision. On a 20 MOA rail that would allow 35 MOA or 60 MOA. For a rail I'd check out Ken Farrel. As rails go, they really don't get much more durable or precise. I had one of his rails on a Rem .308 with the adjustable recoil lug. Solid as they get.
https://barrett.net/accessories/optics/exrings/

As with anything "Barrett", there is a price to pay. With the added flexibility of dual angles that gives one a lot of flexibility that you'd have to have two rails if using other products.

[LoneWolf]

I believe EGW will do custom rails if you contact them.

[rckendall]

When I needed another 20 MOA on one of my rifles, I made a .025 shim for the rear and bedded both front and rear. It was cheap and quite simple to do.

Richard

[Robinhood]

When I needed another 20 MOA on one of my rifles, I made a .025 shim for the rear and bedded both front and rear. It was cheap and quite simple to do.

Richard

and if you bed it it will sit very stable.

[bearcatrp]

Have you considered rings? Burris makes XTR signature rings that go to 40 MOA using inserts. I have them on my savage 338 FCP. Working good so far for me. I have a 34mm scope. The Burris only comes in 1 inch or 1.5 inch height. Measured wrong and ordered the 1.5 inch. Had to order the 1 inch and trying to sell the other.

http://www.burrisoptics.com/mounting-systems/rings/xtr-signature-rings

[Zero333]

Burris Signature like Bearcatrp said.

Farrel makes 40 moa Savage base.

Spuhr makes mounts with 44.4moa (13mil) cant.