Can't keep the bolt cocked

[RyanG]

This may be a stupid question but here goes.... I'm working on an axis. I put in a Rifle Basix Sav-1 trigger. Outside of the stick it works flawlessly. Once I put it into the stock, a Boyds, and tighten it down the trigger will not stay cocked when I close the bolt. I can feel something binding the trigger but for the life I'm me I can find where it's hitting. The sear is clear from the stock and the trigger isn't hitting anywhere that I can see....

What am I missing?

[RyanG]

Nevermind... I put in an accutrigger and it's working just fine. Still couldn't figure out what was causing it to bind up with the Rifle Basix.

Ryan

[J.Baker]

No experience with the Rifle Basix trigger, but clearly it's contacting the stock somewhere.