PDA

View Full Version : Help With Identifying Rifle by Serial Number


joethemarine
03-29-2017, 10:12 AM
Guys,
I bought a 110 from a guy a while back and can't seem to find the correct scope mount for it. The serial number is F725810. It's pre Accutrigger, I know that. Just need info on the exact model in order to find the correct mount. Thanks in advance.
Joe
hereinaz
03-29-2017, 10:20 AM
I usually just look for "flatback" 110 or "roundback" 110 for all of mine, depending on which action it is. Has always worked for me.

And, it seems to me that all the factory two piece bases are actually interchangable on the round back 110, 10 and Axis models.
Hotolds442
03-29-2017, 07:07 PM
Since it's a 110, it's a long action. And as AZ mentioned, the only thing that matters is whether it's a flat back or round back action. And of course whether it's a lefty or righty too.
Texas10
03-30-2017, 09:39 AM
Since it's a 110, it's a long action. And as AZ mentioned, the only thing that matters is whether it's a flat back or round back action. And of course whether it's a lefty or righty too.

Why would a left hand model have a different scope mount?

Inquiring minds would like to know.
hereinaz
03-30-2017, 09:53 AM
If it is a one piece mount, it has a section milled out so you can use your fingers to stuff cartridges into the internal mag easier.
SageRat Shooter
03-30-2017, 10:19 AM
If it is a one piece mount, it has a section milled out so you can use your fingers to stuff cartridges into the internal mag easier.

Wow!! I never knew that... I just went and bought a one piece rail and slapped it on... I either have gotten lefty mounts by luck everytime, or my fingers are small enough to have never noticed a problem.

Good to know, I'll pay more attention from now on.
joethemarine
03-30-2017, 12:53 PM
Thanks guys! Any recommendations?
joethemarine
03-30-2017, 12:57 PM
What about this? EGW 1-Piece Picatinny-Style Scope Base Savage 110 Through 116 Flat Rear Long Action Matte
SageRat Shooter
03-30-2017, 01:05 PM
EGW is one of the most recommended for a 1 piece base. I went with the Blackhawk 20 MOA rail on my 260 build and it works just fine too.
hereinaz
03-30-2017, 03:35 PM
I have used EGW and Warner.

If you are going long range, get a 20 MOA base.