PDA

View Full Version : Trying to do a build for a an elk hunt this fall.



Pages : 1 2 [3]

mattri
08-09-2017, 06:52 PM
Cool what loads are you trying?

Worriedman50
08-09-2017, 11:11 PM
Fireforming loads were 55.5 gr of Reloader 15 with Speer 200 grain, I was not taking a lot of time but rather wanted to get zeroed in and get my brass formed, I will tweak that load some as I have a lot of the 200 gr., Speers, and will maybe just use that to deer hunt with in TN they do show good promise. I am working up loads for 185 gr. Hornady GMX with WIN 748 and BL-C2 this weekend.

mattri
08-10-2017, 04:09 PM
Nice- keep us posted for sure. As I remember bine really liked the 225 Speers, seemed a good middlewight bullet and very accurate.

Worriedman50
09-03-2017, 03:32 PM
Zeroing in on my hunting load, could not make the Hornady GMX 185 gr. group, Barnes 185 TTSX is a better fit for my barrel.

Two charges of Reloder 15, the last five rounds grouped about the bull, 59.5 gr., .050 0ff the lands.
https://i.imgur.com/TneY1cll.jpg

mattri
09-04-2017, 08:34 AM
Looks like you're on the right path!

Worriedman50
10-07-2017, 06:54 PM
https://i.imgur.com/JrJYHAil.jpg

150 yards, I am ready I think.

Robinhood
10-07-2017, 10:10 PM
Shoot it without the lead sled before your hunt. Your POI will change.

Worriedman50
10-23-2017, 07:25 AM
I am running it off leather bags this week, been too busy with work to get back to the range, but I have a 100 rounds loaded to check at 200 for final setting, two weeks out from trip!

Worriedman50
11-15-2017, 12:16 AM
All worked well except the weather, snowed a lot in Montana high country. Did not get a clean shot at a decent bull so I decided to take a fat cow instead. Rifle performed flawlessly, 346 yard knock down shot.

Very pleased with the setup and my result!

mattri
11-15-2017, 01:10 AM
346 on an elk is nothing to sneeze at- well done!!

Worriedman50
12-29-2017, 08:43 PM
https://i.imgur.com/ynsbRQMl.jpg

tb80
12-30-2017, 03:22 PM
Awesome. Congrats.


Sent from my iPhone using Tapatalk

mattri
12-30-2017, 04:48 PM
Steaks!