View Full Version : staggerfeed and dbm
110fp
03-23-2017, 07:49 PM
hello all
I have a factory bottom metal for a dbm
can I use this to replace a stagger feed blind mag?
Thanks for the help
Robinhood
03-23-2017, 10:40 PM
If the DBM is Center Feed, No. The screw hole distance is wrong on the Short action and the location of the mag is wrong for a Long Action.
hereinaz
03-24-2017, 10:24 AM
If the DBM is Center Feed, No. The screw hole distance is wrong on the Short action and the location of the mag is wrong for a Long Action.
Location of the mag is wrong in long action? How is that, never attempted that, but I am curious now.
Robinhood
03-24-2017, 08:08 PM
Location of the mag is wrong in long action? How is that, never attempted that, but I am curious now.
The mag, the mag port and magwell is more foreward on a stagger feed long action and stock. I have never tried the conversion but I have modified a SF LA stock to fit a CF Long Action. Thy say a Dremel or pencil grinder in the right places on the action will get you there but that is for someone else to determine if they have that skill.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.