PDA

View Full Version : What 30 cal bullet choice



Pages : [1] 2

DragonDJ11
03-21-2017, 11:30 AM
Hey all, I am getting everything together to start loading for my Savage 99 in 308

The factory rounds I shot out of it were a 150gr, 168gr, and 178gr

The 150gr appeared to be a bit on the hot side for it as it did not want to eject the spent cases easily. I am guessing that I could load those to a mid range and not have the same issue?

It liked the 168gr, those just seem to be more expensive overall than the 150gr bullets.

Did not care for the 175gr at all.

This will be mainly used for shooting paper at the range, and maybe the occasional hog hunt. What are everyone's thoughts on bullet choice? Should I just spend the extra on the 168gr or would the 150gr with a mid load be good to go?

Thanks

SageRat Shooter
03-21-2017, 12:18 PM
I have a 30-06 that shoots the Barnes 168 gr. TTSX.... It is a great bullet and pretty darn accurate, I took my first, and only 5 pt. Bull Elk 2 years ago with one.

squirrel_slayer
03-21-2017, 01:34 PM
I say shoot what the rifle likes....I used to promote the 155-168 Amax's as a great do all bullet but they are on their way out to be replaced by the eld series and at a premium in cost unfortunately. years back I got a bunch of the 150gr hornady interlock's for free with their get loaded promo. they were nice bullets for the price point. the 150gr interlock is on sale for under .23 a bullet on midway. (the Amax's are .26 and .27 currently as well) the sst's I hear a good as well.

then theres the trusty Remington corelok, sierra's game kings, and so on. the barnes stuff is nice but comes at a premium. if you keep an eye out you can pick up accubond and ballistic tips from shooter pro for a good deal. their cosmetic blemished but I've never found anything wrong with them.

Haiku_Rodney
03-21-2017, 02:05 PM
I second what squirrel slayer says. If you are primarily punching paper, shoot what the rifle likes. I don't find hogs to be particularly hard to put down especially if you can pinpoint where your bullet will hit. I shoot 150 gr Speers and generally do head/neck shots to minimize meat loss.

DragonDJ11
03-21-2017, 08:28 PM
I should have done some more research first. To start, the 150gr, were very accurate and I shot a one inch group at fifty yards off hand. They were just sticky to eject.

That said, I just researched the manufacturer list fps on them and they list at 2825 fps. Checking the manual that was a top end load at about 58,000 psi. In contrast the 168gr was listed at 2670 and manual has that around 49,000 psi.
So I should be able to load a 150gr and keep away from the upper loads and maybe end up with a good shooting round. Obviously this is dependent on the rifle liking that bullet at a slower fps.
Others agree with that assessment?

Haiku_Rodney
03-21-2017, 10:16 PM
I am not by any means an expert. However, I find the best accuracy in my rifles are loads that are a little less than maximum. As far as I know, finding a good load is pretty much trial and error. Have fun!!!

m12lrs
03-22-2017, 05:52 AM
What twist?

I would.certainly try varget and.the 168 MK for a paper punching load

If you push it.out.past.600 yrds you really need to step up.to.the.175s.

DragonDJ11
03-22-2017, 09:47 AM
1/12 twist. Anything I'll be doing won't exceed 200 yards

243LPR
03-22-2017, 12:11 PM
The do all for my 308 hunting is the Barnes 130 TSX.

rjtfroggy
03-22-2017, 04:52 PM
With a 1:12 twist try the 150gr. SMK with IMR 4895 loaded around the mid point of the book listing @ 0.020 off the lands. You just may have a pleasant surprise.

trentcwwilson
03-22-2017, 06:23 PM
Haiku_Rodney, my 10 FCP-SR 24" LOVES the hot loads. 44.7gr(.3 below max) Varget for 175 SMKs and 44.6 (max) for the 185 Berger Juggernauts. Both show sights of ejector marks and the Bergers are actually separating the anvil from the primer cups. First load I've ever had that happen with. No primer flow or cratering though...

Sent from my SM-G900R4 using Tapatalk

hardnosestreetcop
03-27-2017, 02:34 PM
Through extensive load development and testing ive been able to find loads that my Savage Model 10 FP likes. 150,165 and 168 haven't started testing the 175's yet. But for just punching paper the 147-150's may keep the cost down.

trentcwwilson
03-27-2017, 02:41 PM
Through extensive load development and testing ive been able to find loads that my Savage Model 10 FP likes. 150,165 and 168 haven't started testing the 175's yet. But for just punching paper the 147-150's may keep the cost down.
Are you having luck with the lightweights in a 10 twist? I can't seem to get them to group.

Sent from my SM-G900R4 using Tapatalk

Zero333
03-27-2017, 10:01 PM
Don't overlook Sierra Gameking bullets. The 165 gr Gameking is extremely accurate as well as the 180 gameking. Both will shoot well with Varget, Win brass, 210m primers 42 to 44.5gr is a good window.

trentcwwilson
03-27-2017, 10:06 PM
If only there was an online store that sold bullets by the bullet. Don't have to buy a box of 50 (Barnes) or 100 (most manufacturers). I only got the 185 Juggernauts and 175 MatchKings because I got a smoking deal on them. Both great for a 10 twist. They especially love the 5R rifling.

Sent from my SM-G900R4 using Tapatalk

Robinhood
03-27-2017, 10:15 PM
Haiku_Rodney, my 10 FCP-SR 24" LOVES the hot loads. 44.7gr(.3 below max) Varget for 175 SMKs and 44.6 (max) for the 185 Berger Juggernauts. Both show sights of ejector marks and the Bergers are actually separating the anvil from the primer cups. First load I've ever had that happen with. No primer flow or cratering though...

Sent from my SM-G900R4 using Tapatalk

This is a Savage 99. For the m10 I could not agree more.

trentcwwilson
03-27-2017, 10:22 PM
I've got a 99 as well. She doesn't see as much use as she once did.

Sent from my SM-G900R4 using Tapatalk

hardnosestreetcop
03-28-2017, 12:23 PM
trentcwwilson I have done no load development and testing with any bullet weight less than 150 grains.

trentcwwilson
03-28-2017, 03:46 PM
trentcwwilson I have done no load development and testing with any bullet weight less than 150 grains.
I was speaking on the 150s.

Boondoggle
03-28-2017, 04:04 PM
Don't overlook Sierra Gameking bullets. The 165 gr Gameking is extremely accurate as well as the 180 gameking. Both will shoot well with Varget, Win brass, 210m primers 42 to 44.5gr is a good window.

+1 this. My Howa HB (1-10 twist) didn't shoot anything under 175gr worth a hoot until I tried the SGKs in the 165 gr BTSP. Shoots those almost as good as the Berger Juggernauts.


Sent from my iPad using Tapatalk