DEFCON7727
03-06-2017, 07:45 AM
**PLEASE DISREGARD** Found the information and accomplished what I wanted to do**
Greetings, I have the aforementioned SxS, single trigger, selective ejectors. I would like to polish the ejector rods and the ports they slide in. I cannot find a good shop manual. I have figured out if I push one in and push in the sear it will lock back. I would like to know if removing the sole machine screw just behind and in the middle of both ejectors will allow them to slide out. The screw also appears to be staked. I know there should be a spring and collar in there.
Thank you, Tom
Greetings, I have the aforementioned SxS, single trigger, selective ejectors. I would like to polish the ejector rods and the ports they slide in. I cannot find a good shop manual. I have figured out if I push one in and push in the sear it will lock back. I would like to know if removing the sole machine screw just behind and in the middle of both ejectors will allow them to slide out. The screw also appears to be staked. I know there should be a spring and collar in there.
Thank you, Tom