Blown Primer Help??

[scamp62]

I had a blown primer, ejected the round, and the primer was gone ??
It was not a hot load, but I think a lose pocket (that batch brass is going in the trash (FC)).
Q1: ware did it go ??
Q2: the spent cases don’t eject like they use to ??
Q3: the fix ??

Thanks for the help !!

P.S. The plunger (ejector seem very soft, but it still moves in and out)

[snipecatcher]

Take the stock off and check the magazine box. My one and only blown primer ended up in there. I can't help with the other questions.
Regards,
-Dan

[Dirk]

Q1. Look in the bolt lug recesses
Q2. The ejector is not working properly
Q3. Remove the ejector and clean the carbon (from the blown primer) out of it

[scamp62]

Sorry, but how dose one go about removing the ejector ??

[BillPa]

Sorry, but how dose one go about removing the ejector ??


Here > http://savageshooters.com/SavageForum/index.php/topic,10681.0.html

[lostart]

Is the ejector stuck inside the bolt head?

[scamp62]

no it moves in and out.

and thank you BillPa !!!!!

[ofdscooby]

Hand loads? I had that problem recently I switched to hand primer and that helped my primer problem. I have an old hollywood press and the primer seater was just not cutting it anymore.