Model 11 FCNS aftermarket bolt handle

[buffalojim]

Howdy all. Just kicking around the idea of an aftermarket bolt handle for my first Savage rifle. Stock handle seems a little small and my hand is kind of close to the scope when cycling. It is a deer rifle so its not absolutely critical. But in the heat of the moment, it could be an issue. Not looking for something to use as a kick stand. Just something a little bigger with a little more clearance. Any recommendations or advice greatly appreciated.

[dfrosch]

This one is the next step:
http://www.midwayusa.com/product/1778193602/savage-arms-1-piece-bolt-handle-assembly-savage-10-110-large-knob

[buffalojim]

Thanks. Anyone try Stockade bolt handles> A little pricey but the size doesn't seem to much bigger. Might fit the bill

[dfrosch]

The Stockade bolt handles are good. Got one. They are longer than the Savage target handle. The knurl is a little coarser than I like.

[foxx]

I like the stockade's, but not for hunting. Kind of a kickstand, as you said. Mine are all right handed actions, but I shoot/carry/stalk left handed and so I really hate the way most "tacticals" poke me in the belly. THe larger factory bolt handle dfrosch suggested is as large as I would go for hunting rifle.

[buffalojim]

Hey dfrosch, how much longer would you say the stockade bolt is compared to the stock handle if you had to guess? Thanks

[dfrosch]

I have the small(5/8" knob) Stockade bolt handle on a 22-250. It's about 3-1/4" from the center of the hole to the tip of the handle. By comparison, a standard Savage is about 2-5/8" long and the target Savage is about 3-1/16" long.