Staggerfeed box help

[trucktracker]

I have a pre-accutrigger 110FP in 308. I broke off one of tabs on the box attached to the action. Anyone have suggestions or know a location that sells replacements? Thanks.


Sent from my iPhone using Tapatalk

[ninner]

Have you checked gunpartscorp?


Sent from my iPhone using Tapatalk

[trucktracker]

No. I just broke it and wasn't sure where to start looking. I'll check. Thanks.


Sent from my iPhone using Tapatalk

[rosewood]

Gunparts list them. Midwayusa has a listing for the long action but are out of stock. Midway is cheaper, but do not see the short one listed. I am waiting on Midway to get them in stock as well as another part they keep showing on back order.

Rosewood

[trucktracker]

Thank you.


Sent from my iPhone using Tapatalk

[RustyShackle]

I think everyone is sold out on those? Not sure there are even going to be replacements made as its an obsolete design now.

[ninner]

Is it a long action? If anyone can chime in on wether a 300 mag box can be made to work I have an extra I could part with.


Sent from my iPhone using Tapatalk

[handirifle]

I might be wrong, but I think the mag box from ANY long action caliber ought to work. Some one might have one in classifieds from a DBM conversion. Is yours a detachable box magazine (DBM) or internal magazine? They are slightly different.

[trucktracker]

It is a long action. Early design when both short and long action calibers came in a long action. If it's obsolete I guess it will force the $209 CDI DBM.


Sent from my iPhone using Tapatalk

[trucktracker]

It is currently blind staggerfeed


Sent from my iPhone using Tapatalk

[devildogandboy]

give Jack First gun parts a call, they might have it.

Bruce

[RustyShackle]

It is a long action. Early design when both short and long action calibers came in a long action. If it's obsolete I guess it will force the $209 CDI DBM.


Sent from my iPhone using Tapatalk

A center feed can be made to work.

[Robinhood]

Some of those actions were made with long and short mag port provisions.

[rosewood]

I found this on the gunparts page, not sure if it is the right one or not.

https://www.gunpartscorp.com/Products/999140A.htm

Rosewood

[Robinhood]

Trucktracker. Measure your old box for length.











Edited, thanks Rosewood. Post corrected.

[rosewood]

Rosewood. Measure your old box for length.

I am not the one looking for one. Thought that might be one the OP needed.