View Full Version : Bore Guide For SA Model 10?
DenverDave
12-30-2016, 08:48 PM
I have decided to upgrade my rifle cleaning equipment. Going to order a one piece cleaning rod (Dewey?) and a bore guide. Can anyone suggest a guide that has worked well in their model 10 short action? Products to avoid?
My rifle is a model 10T in a XLR Element Chassis. I have needed to lower my cheek riser to get a rod in straight in the past and anticipate needing to do so with a new rod/guide.
AndrewX
12-30-2016, 09:40 PM
I recommend the Sinclair bore guides without hesitation.
http://www.sinclairintl.com/gun-cleaning/rod-guides-bore-guides/bolt-action-rifle-guides/index.htm
DenverDave
12-30-2016, 09:56 PM
Anyone tried the Tipton Rapid? Looks a little gimmicky but reviews are good...
DenverDave
12-30-2016, 09:58 PM
I recommend the Sinclair bore guides without hesitation.
http://www.sinclairintl.com/gun-cleaning/rod-guides-bore-guides/bolt-action-rifle-guides/index.htm
Thanks for the input I will have a look. I have been looking around Amazon because I am a prime member and have a gift card....
Wildcat
12-30-2016, 10:07 PM
I second what AndrewX said above.
DenverDave
12-30-2016, 10:10 PM
How much additional length should I account for with the use of a guide? I know they all are different but ballpark?
The length of my 10 SA with a 26" barrel + brake =33" would a 40" rod do it or better to be safe with a 44"?
DenverDave
12-31-2016, 12:55 AM
I second what AndrewX said above.
The O-Ring models or Adjustable?
cdhbrad
12-31-2016, 08:31 AM
For my Model 10 and 12 in .308 I use the Sinclair O-Ring bore guide. Part # 749-002-947. I also use a 44" Dewey rod and my barrels are 26" and 28" in length. With the muzzle brake you have, I am sure you need the extra length as well.
Wildcat
12-31-2016, 09:42 AM
I use the O-ring models and a 44" long Dewey cleaning rod for my bolt actions with 26" and 28" long barrels.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.