View Full Version : Removing bolt body lettering
brianlt21
12-18-2016, 03:18 PM
Anyone know an easy way to remove savage name from bolt body
Robinhood
12-18-2016, 03:46 PM
Depends on the finish. If it is shiny like chrome, a jewelers /polishing wheel. Black or jeweled prepare for Cerakote or something different.
clintsrv
12-18-2016, 04:34 PM
I used a cut off piece of an AR barrel I shortened.
The 1/2x28 muzzle threads will screw right into bolt body.
I grinded the barrel piece into a size that would fit in my drill press chuck. (1/2")
Just turned it slow and wrapped sand paper around it till I got my desired finish.
This body was the shiny jeweled body. I removed all the jeweling also.
clintsrv
12-18-2016, 04:38 PM
I used a cut off piece of an AR barrel I shortened.
The 1/2x28 muzzle threads will screw right into bolt body.
I grinded the barrel piece into a size that would fit in my drill press chuck. (1/2")
Just turned it slow and wrapped sand paper around it till I got my desired finish.
This body was the shiny jeweled body. I removed all the jeweling also.
http://uploads.tapatalk-cdn.com/20161218/f788bcd96c5d5ea19d28298c63de9526.jpghttp://uploads.tapatalk-cdn.com/20161218/ea91845ffa666b5f7545d73a28ea4017.jpghttp://uploads.tapatalk-cdn.com/20161218/276b464cc6214bd67ed259997a1a5e65.jpg
Sent from my iPhone using Tapatalk
clintsrv
12-18-2016, 04:45 PM
After thinking about if all you're wanting gone is the letters this way is probably not going to work!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.