Best ring combo on a 10T with 20MOA???????

[KevDoggy]

Whats the best 30mm ring setup for mounting my 6/24/50 on my savage rail ??I just got anew rifle and the scope is too high and not staying putin the cheap rings I had bought.

Thanks, Kyoung

[drybean]

Burris sig. zee rings

[Zero333]

For a tactical rifle where light weight is not as important,.. best bang for your buck in my opinion are the Millet tactical (low height for a 50mm objective) rings. They're very solid, surprisingly square and true and extremely low cost.

One huge downside is that the Millet rings are not made in the USA.

For a field rifle where weight matyers, I also recommend the Burris signature zee rings.

[19E60]

Vortex Precision Matched Rings. I have them on 2 rifles and see no need for anything else. .87 height on my Stealth with EGW 20moa.

[KevDoggy]

I ordered some EGW 30mm lows for it, will see how they workout

[Zero333]

Low rings are ideal. Just make sure the objective bell is forward enough to clear the front of the rail. There are some rails that are a bit long and a little trimming of their front is needed, but that's not a very common situation.

[FiveInADime]

I personally think that the benefits of Burris Signature rings far outweigh any shortcomings they may have. They're the only rings I'll buy (except when I need a set of silver 30mm, dang it).

Sent from my SM-G930V using Tapatalk

[Rucker61]

I'm running the Burris Sig rings in 34mm for my 10T and I'm quite content.

[goosedowner]

I'm running the Burris Sig rings in 34mm for my 10T and I'm quite content.

Are you using the tactical 6 bolt ones or the 2 bolt ones?

[cowtownup]

BUrris XTR signature series...

[FiveInADime]

Are you using the tactical 6 bolt ones or the 2 bolt ones?
30mm are 4 screw, 1" is 2 screw.

Sent from my SM-G930V using Tapatalk

[Rucker61]

Are you using the tactical 6 bolt ones or the 2 bolt ones?

6 bolt tactical