Size of ejector retaining pin hole

[bigfish27]

What is the size of the ejector retaining pin hole. I think they should all be the same. But specifically for a 223. To much headspacing has roughened the interior of the hole.
Thank you
Marlin

[drybean]

I have a spare ejector retaining pin a can measure if that helps

[Robinhood]

Deleted: bad advice.

[sharpshooter]

The retaining pin hole is .063". The ejector hole is .103", plus or minus .001".

[Robinhood]

Thanks Fred. I glazed over that one. I do use a 1/16th pin punch on the retainer pin.

[bigfish27]

Thank you Sharpshooter. Now i an order a reamer to clean up the hole.