Using Magnum primers in a non Magnum cartridge

[airb080]

So tomorrow I'm going to Cabela's in Delaware to pick up some powder. I am running low on primers for my 30-06 & 243. Everytime I've been to Cabela's they seem to have everything but large rifle primers. Can I get away with using magnums. I know I would have to rework my load's. I wanted to order an 8 pounder from mid South,but they were out of large primers also. I live about 20 minutes from bass pro in Maryland, but they charge between 6-7 per 100 on primers and they're powders are always about 10 dollars more than Cabela's. Plus they don't charge tax up in DE. Thanks in advance for your input.

[gbflyer]

Yes.

[handirifle]

Never done it, but some say that especially with harder to ignite powders, it provides more consistent ignition. What defines a hard to ignite primer, I don't have a clue.

[SidecarFlip]

Velocity and pressure will change, though not a lot. If you are loading below maximum charge, there won't be an issue, if you are loading hot, there might be. I've substituted in the past building loads but they will change.

[yobuck]

Have you checked with (Shyda's) in Lebonan, good prices, 717 273 6572.

[airb080]

Well not going to make Cabela's today. Yes I've heard of shydas, but that's almost a 2 hour drive. I think my boss is going up there sometime this month for their anniversary sale, l might have him grab me a few pounds of powder and some primers.

Sent from my XT1585 using Tapatalk

[Robinhood]

Velocity and pressure will change, though not a lot. If you are loading below maximum charge, there won't be an issue, if you are loading hot, there might be. I've substituted in the past building loads but they will change.

This^

[LHitchcox]

Sometimes when shooting in cold weather or when using a large charge of powder in something like a .25-06 or .30-06, a magnum primer will give better ignition and more uniform performance. Heck, I use CCI 450 primers in .223 in an AR 15 because of the thicker cup to help avoid a slam fire and to get more uniform ignition with ball powder.

[airb080]

I'm running 43.6 GR of 4350 with nosler 80 GR ballistic tips in my 11 VT 243 and it's holding around 3/4"-1/2" groups at 100. And I'm running 46.8 GR of RL15 with 168 GR hornady HPBT in my old model 110 holding 1/2" or better groups at 100. Not really sure how far I should back down my charges.

Sent from my XT1585 using Tapatalk

[hardnosestreetcop]

The Magnum primers are best used with very large amounts of very slow burning powder because the flame generated burns longer and hotter. With heavy bullets or in very cold temperatures. You may be able to get away with it in the 30-06 with a 180 Gr bullet, but the 243 case doesn't have the case capacity to hold a large enough amount of a slow burning powder for a complete burn, or us a heavy enough bullet to aid in the complete burn of the powder. Fellow the reloading data if the data calls for a Magnum Primer then use one, if it doesn't then don't !

[psharon97]

Bullets.com has large rifle primers in stock. Their prices are very reasonable.

http://bullets.com/search?q=(primer_type:Rifle)

[Zero333]

Fed 215/215M are a safe substitute for LR primers. I've tested them in 308w / 243w and 300winmag. In the 300winmag with H-4831 there was no difference in velocity or POI compared to 210M.

In a 308win, with Varget, POI did not shift much at 220 yards. Groups were the same size as with 210M but BR2's printed the best groups.

In a 243win with H-4831, POI was 1.5" higher at 220 yards. Groups were the same as with 210M

WinLRM primers are said to be one of the hotter primers so with those I would reduce a lil and re-work up the load.

CCI-34 are very good primers for standard size cases even tho they are a Magnum primer. They do however have a hard cup and a weak firing pin will have the odd Failure To Fire.
CCI-250 are almost identical to the CCI-34 except the anvil of the 250's is a lil more pointy and not as short as the CCI-34's.

CCI-34's are the best primers for milspec semi-auto/full auto rifles because they give an extra safety margin in case of a slam-fire.

[ttexastom]

normally, I use magnum primers on any powder slower burning than h380. got this idea after seeing in an older rl manual. plus any ball powder needs a magnum primer because they can be tough to ignite. duplex and triplex loads were once popular with an extended tube into large cartridges. that idea seems to have faded away. as always measure the case head for expansion. be sure to look at primers for cratering. look at base of cartridge for shiny marks. if you see any signs back off a least 1 grain of powder. in the old days people pushed cartridges hard. ken waters, parker ackley, Fred huntington, Fred barnes, and many others pioneers we owe a thank you. they all took a lead in pioneering safe standards that we see today

[bigedp51]

At Lake City the military used magnum primers with all their rifle loads, all you need to do is make a workup load.

Check out the primer test photos below, I think "The Doors" sang "Light my Fire" when Remington was developing their primers.

Primer Flash Test Photos
http://www.6mmbr.com/primerpix.html

[FW Conch]

Have seen that comparison before. But, have You found the Remington's to be the most accurate?

[bigedp51]

Have seen that comparison before. But, have You found the Remington's to be the most accurate?

Lately all I have been using are Rem 7 1/2 with H335 for my two AR15s and CCI BR4 primers with single base powders in my Savage .223.

I'm 67 and have chronologically gifted eyesight and drink too much coffee to give you a honest answer. Meaning my best groups are normally a accident. (golden years humor)

[hardnosestreetcop]

Yes I agree "Sometimes when shooting in cold weather or when using a large charge of powder in something like a .25-06 or .30-06, a magnum primer will give better ignition and more uniform performance." Under these conditions and with large case's and heavy bullets !

[toddcdozer]

I've done it both ways. Magnum in smaller stuff and 210s in my Edge. Best ES and group I ever found with an Edge was with regular primers and 94.7 of Retumbo. An Edge is definitely a MAGNUM but ES dropped by 7 from a Magnum load.

[MZ5]

http://www.shootingtimes.com/2011/01/04/ammunition_st_mamotaip_200909/

[Mountain Man]

Not sure on your exact location but I used to live in Centreville on the eastern shore and would regularly visit Smyrna Sporting goods in, you guessed it, Smyrna, DE. They kept a really good stock of primers and powders 6 ish years ago. Might be worth a shot, if they're still in business.

Sent from my SM-S820L using Tapatalk