110 LA in 300wsm

[nuttybarrels]

I was wondering if the action will handle mild to medium loads using 180 to 200 grain bullets with 7828 or slow type powders. not going to push it hard just need some opinions

[RC20]

Seems more like a question for the reloading section.

Quick look does not show that powder use, goggle search can assist.

http://www.longrangehunting.com/forums/f28/300-wsm-loads-65371/

[RC20]

Starting reloading today, found IMR 7828 used.

It does range across bullet sizes from 165 to 200.

I don't usually list loads but you can find it on Sierra web site.

Frankly if the books says it will hold max charges then it will.

Limiting is some powders are totally unsuitable to some cartridges, you can take it to the limit in the book keeping an eye on the over pressure signs (sticky bolt is a good one, others like primers are not good indicators and need to be used with a preponderance of evidence.

[darkker]

Action strength?
As long as you keep it within SAAMI pressures they do fine. I've got a 6.5 Leopard in a large shank, been fine and dandy.

[geargrinder]

I was wondering if the action will handle mild to medium loads using 180 to 200 grain bullets with 7828 or slow type powders. not going to push it hard just need some opinions

I ran 190g VLD's out of my 300wsm's. They liked to be pushed hard. I backed off a bit once I started to see over-pressure signs.

Mine were all on small shank long actions.

[nuttybarrels]

I will be shooting 4831sc, 4831, rl26, 7828 just plinking only gave 75 for the barrel it's prolly shot out but will see what I can make it do. First short mag I have shot. used to shoot 308 baer 250smks with 88gr 7828 long time ago