Redandwhite_72
09-02-2016, 10:05 AM
I got a new to me 223 barrel and bolt head. I installed them and test fired it and here's result.
http://uploads.tapatalk-cdn.com/20160902/94f1b9850570276c258c4a2f99eba6ab.jpg
I am measuring the firing pin protrusion at .065. Is there any way to shorten it on these firing pins without a file?
http://uploads.tapatalk-cdn.com/20160902/99055f9b58b951f0d07b8874c4c12c94.jpg
I'm measuring the difference of the firing pin hole and the firing pin to be roughly .003-.005. Not sure what it's suppose to be. It's not an exact measurement. With the pin laying on one side of the hole I used the calipers to push it to the other side and measure the difference.
Sent from my SM-G900V using Tapatalk
http://uploads.tapatalk-cdn.com/20160902/94f1b9850570276c258c4a2f99eba6ab.jpg
I am measuring the firing pin protrusion at .065. Is there any way to shorten it on these firing pins without a file?
http://uploads.tapatalk-cdn.com/20160902/99055f9b58b951f0d07b8874c4c12c94.jpg
I'm measuring the difference of the firing pin hole and the firing pin to be roughly .003-.005. Not sure what it's suppose to be. It's not an exact measurement. With the pin laying on one side of the hole I used the calipers to push it to the other side and measure the difference.
Sent from my SM-G900V using Tapatalk