View Full Version : Mark I/II/93R: Method or pad to extend length of pull on a Mark II BRJ
joebeck
08-19-2016, 06:19 PM
I have a Mark II BRJ and need to extend the length of pull by 1 inch. What methods or pads have has anybody used?
Thanks
http://i1075.photobucket.com/albums/w440/joebeck2/IMG_0265.jpg
JUS1MO
08-22-2016, 02:57 PM
I have used a wrap around leather pad that closes tight with Velcro.
handirifle
09-03-2016, 01:57 PM
If you want something mounted on the stock, pull the butt plate off and use that as a template to sand a spacer of your desired thickness. If you screw it up, butt plates are a lot cheaper to replace than stocks.
LoneWolf
09-03-2016, 03:05 PM
Or cut it off and order a new pad from kick-EEZ. Simply sand/grind to fit and a quick wet sanding to make it look good.
"The strength of the wolf is the pack, but the strength pack is the wolf"
Proudly sponsored by Apache Gun Works
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.